Scientists have made a disturbing discovery: human brains contain microplastics, and at higher concentrations than other organs. Worse, brain levels have jumped 50% in just eight years.
Scary. Is plastic more or less expensive than cardboard/paper? I’m not sure if it’s where I live, but I’ve noticed that during my childhood, (example) most takeout containers would be either foil or paper. Now, most of them are plastic, even the cups that contain sauces. I don’t get why plastic has been embraced so much when the alternatives were far easier to recycle.
Plastic’s a product from the Oil and Gas industry - a crude oil byproduct, naptha into nurdles - and they make a fucktonne of cash from it. Obviously not talking about every type of plastic or the “bio-plastics.” Almost all plastic comes from O&G.
I recall a moment maybe in the early 2000s when the industry lobby tried arguing they were actually being environmentalists and serving the public good by making plastic out of what would otherwise be toxic waste, like they’re responsibly using every part of the animal. So ridiculous they dropped the campaign within the week iirc.
But I think about that every time a Premier or Mayor comes out weirdly, strongly opposed to this plastic bag or that plastic straw being banned - that they’re virtue signalling to the O&G lobby.
So it’s not about what consumers or society embrace, or what’s logical or easier. O&G don’t care if we recycle it, huff the fumes melting it down, or feed it to the fishes. They don’t even really care how little their nurdle sells for, just as long as they can still sell it for something.
I’m not so sure what cardboard/paper you mean? If you mean something like the paper cups that coffee comes in, they also contain plastic. Dirty paper/cardboard can also not be recycled, so your pizza carton ends up in a landfill or burned. And what do you mean by foil? Genuinely curious.
In my area a lot of takeout places now offer reusable options for a deposit. Usually it is a cardboard with plastic lining container if it is one way. Except the Asian takeout places, they are all over the place from classic black plastic to aluminum containers to styropor to - circling back - the plastic carton stuff.
Plastic also has the benefit that it’s really easy to make in whatever shape with injection molding, and is totally permanent, which if you don’t care about disposal is great.
Meanwhile, making stuff out of a sheet of paper is a manufacturing challenge that has resulted in creative solutions like corrugation, and the container might seep through or soften or something.
There’s a thing called extended producer responsibility which basically is the idea of making disposal not free anymore for the manufacturer.
permenent? can’t plastic get melted down and recycled again?
once i put some plastic container in the dishwasher and it got too hot, it kind of melted a bit. it didn’t totally melt but the lid doesn’t fit anymore.
Not very well. Those long molecules break down into shorter segments every time they’re recycled, which makes for an inferior and eventually useless product. Some plastics are also thermoset and can’t ever be melted again, and some are just hard to recycle for other reasons and get picked out and landfilled. The whole idea of plastics recycling is basically greenwashing on a massive scale; the industry put a lot of money into promoting it to avoid scrutiny.
That being said, they’re also permanent in the good way. Plastics don’t biodegrade or erode. If you bury a plastic pipe in the ground, it may well still be there and intact in a million years. Anything natural will rot long before that, common metals will corrode, and concrete usually has metal rebar inside that pulls it apart as it corrodes. Plastic is also lightweight, which ceramics (stone-like materials) and metals are not, while still being strong under tension like metals.
Sunlight does slowly break down many plastics, but only into ever-smaller particles, which is where the microplastics in OP come from.
oh wow, i didn’t realize that, i thought it was infinitely reusable just by melting and re-forming it. thank you really much for the explanation.
what you wrote reminded me of silly putty, it’s really stretchy and elastic to start with, but if you play with it for a while, it starts to be less elastic and breaks apart.
does metal also break down? i’m thinking about like aluminium cans that are used for soda and stuff like that
Nope, metals are elements as opposed to molecule compounds and literally can be melted and cast forever. They say most of the gold ever mined is still in use today, so your modern ring might have bits of a ring melted down in ancient Egypt in it. Glass is like this too. Paper is more like plastic, albeit somewhat biodegradable when it eventually has to be thrown out.
In practice, there’s still a limit for many metals because they will get contaminated. Copper building up in scrap steel is a problem IIRC. It’s not a big issue with aluminum, though, unless you’re doing something like building an airplane where you need super high purity. Cans are almost all recycled into more cans.
There are ways to purify a metal melt, but they can be expensive and usually produce waste slag. I’ve never heard of glass being purified; it’s probably too cheap to not just make more of, since it’s derived from really common minerals.
My cast iron pan was made from recycled iron. And if I bought it a month later it would be in the batch that has a product recall because they also recycled some lead in it
A lot of metals are fairly easy to recycle. For others, being alloys (basically a mix of various metals in varying quantities), it’s more tricky as you can’t always really get a pure product out of recycling very easily, so it limits the types of things you can do with them. But all in all it’s way better than with plastics.
Scary. Is plastic more or less expensive than cardboard/paper? I’m not sure if it’s where I live, but I’ve noticed that during my childhood, (example) most takeout containers would be either foil or paper. Now, most of them are plastic, even the cups that contain sauces. I don’t get why plastic has been embraced so much when the alternatives were far easier to recycle.
Plastic’s a product from the Oil and Gas industry - a crude oil byproduct, naptha into nurdles - and they make a fucktonne of cash from it. Obviously not talking about every type of plastic or the “bio-plastics.” Almost all plastic comes from O&G.
I recall a moment maybe in the early 2000s when the industry lobby tried arguing they were actually being environmentalists and serving the public good by making plastic out of what would otherwise be toxic waste, like they’re responsibly using every part of the animal. So ridiculous they dropped the campaign within the week iirc.
But I think about that every time a Premier or Mayor comes out weirdly, strongly opposed to this plastic bag or that plastic straw being banned - that they’re virtue signalling to the O&G lobby.
So it’s not about what consumers or society embrace, or what’s logical or easier. O&G don’t care if we recycle it, huff the fumes melting it down, or feed it to the fishes. They don’t even really care how little their nurdle sells for, just as long as they can still sell it for something.
Plastic is generally cheaper; for a while there was a misguided push against using paper/cardboard because sAvE tHe TrEeS
I’m not so sure what cardboard/paper you mean? If you mean something like the paper cups that coffee comes in, they also contain plastic. Dirty paper/cardboard can also not be recycled, so your pizza carton ends up in a landfill or burned. And what do you mean by foil? Genuinely curious.
In my area a lot of takeout places now offer reusable options for a deposit. Usually it is a cardboard with plastic lining container if it is one way. Except the Asian takeout places, they are all over the place from classic black plastic to aluminum containers to styropor to - circling back - the plastic carton stuff.
The plastic industry is why.
Plastic also has the benefit that it’s really easy to make in whatever shape with injection molding, and is totally permanent, which if you don’t care about disposal is great.
Meanwhile, making stuff out of a sheet of paper is a manufacturing challenge that has resulted in creative solutions like corrugation, and the container might seep through or soften or something.
There’s a thing called extended producer responsibility which basically is the idea of making disposal not free anymore for the manufacturer.
permenent? can’t plastic get melted down and recycled again?
once i put some plastic container in the dishwasher and it got too hot, it kind of melted a bit. it didn’t totally melt but the lid doesn’t fit anymore.
i dunno if it was injection molded though
Not very well. Those long molecules break down into shorter segments every time they’re recycled, which makes for an inferior and eventually useless product. Some plastics are also thermoset and can’t ever be melted again, and some are just hard to recycle for other reasons and get picked out and landfilled. The whole idea of plastics recycling is basically greenwashing on a massive scale; the industry put a lot of money into promoting it to avoid scrutiny.
That being said, they’re also permanent in the good way. Plastics don’t biodegrade or erode. If you bury a plastic pipe in the ground, it may well still be there and intact in a million years. Anything natural will rot long before that, common metals will corrode, and concrete usually has metal rebar inside that pulls it apart as it corrodes. Plastic is also lightweight, which ceramics (stone-like materials) and metals are not, while still being strong under tension like metals.
Sunlight does slowly break down many plastics, but only into ever-smaller particles, which is where the microplastics in OP come from.
oh wow, i didn’t realize that, i thought it was infinitely reusable just by melting and re-forming it. thank you really much for the explanation.
what you wrote reminded me of silly putty, it’s really stretchy and elastic to start with, but if you play with it for a while, it starts to be less elastic and breaks apart.
does metal also break down? i’m thinking about like aluminium cans that are used for soda and stuff like that
Nope, metals are elements as opposed to molecule compounds and literally can be melted and cast forever. They say most of the gold ever mined is still in use today, so your modern ring might have bits of a ring melted down in ancient Egypt in it. Glass is like this too. Paper is more like plastic, albeit somewhat biodegradable when it eventually has to be thrown out.
In practice, there’s still a limit for many metals because they will get contaminated. Copper building up in scrap steel is a problem IIRC. It’s not a big issue with aluminum, though, unless you’re doing something like building an airplane where you need super high purity. Cans are almost all recycled into more cans.
There are ways to purify a metal melt, but they can be expensive and usually produce waste slag. I’ve never heard of glass being purified; it’s probably too cheap to not just make more of, since it’s derived from really common minerals.
My cast iron pan was made from recycled iron. And if I bought it a month later it would be in the batch that has a product recall because they also recycled some lead in it
thank you for the explanation, it was really interesting and in-depth! you should be a teacher!
Thanks! I’m not sure I have the same presence IRL, haha.
ah don’t worry about that, lots of it is online now :3
A lot of metals are fairly easy to recycle. For others, being alloys (basically a mix of various metals in varying quantities), it’s more tricky as you can’t always really get a pure product out of recycling very easily, so it limits the types of things you can do with them. But all in all it’s way better than with plastics.