• Rose Thorne(She/Her)@lemm.ee
    link
    fedilink
    English
    arrow-up
    75
    arrow-down
    1
    ·
    10 months ago

    We had to wear one of these while I was a package handler for FedEx. It was tied into a scanner unit attached to your finger, scan packages as you load.

    You’d think you’d get used to it, but it always felt like I had a tumor strapped to my arm while trying to sling things around.

        • rosa666parks@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          13
          ·
          10 months ago

          Yes I can “SatansMaggotyCumFart”

          Our building had bay doors lined up on one side of the building, it was the off season so we would only use the first quarter of bay doors. At the end of line of garage doors we would use the last 1-3 bays as a sort of “overflow” (I was only there for a few months so I didn’t fully know what they were for.)

          We would call it the “abyss” because no one went back there, and there were a few lights out so it was kinda dark. I mostly worked there, when it was a heavy day and the belts were pretty full they would send all packages to the abyss and we would get so back up with packages it worked jam halfway up the shoot to the trailer. So we would have to get a ladder and a stick to fix the jam.

          We would sometimes solve the jamming issue by spraying lube on the shoots to help them slide better. It would make the shoots very slick if you tried to walk on them. Also we had fans blowing air into the trailer and if it was a very hot day they would just blew already hot air into a hotter trailer.

          • HRDS_654@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            10 months ago

            Hey now, as a former FedEx package handler we never walked up the chutes. That would be dangerous. /s

    • andrew_bidlaw@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      14
      ·
      10 months ago

      I had a joke about you and the Platinum Chip, but I lost it at that funny description. I bet in Fallout world many people have disproportional arm muscles due to swinging around pre-war Pip Boys on their hands.

    • cryptosporidium140@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      8
      ·
      edit-2
      10 months ago

      I enjoyed it for some reason. I think I just preferred scanning and labeling over being in the truck unloading. And it felt like a Pip Boy. But that’s another thing, if you were loading vs. unloading that might be different. I wouldn’t want to lift anything with that on

      • Rose Thorne(She/Her)@lemm.ee
        link
        fedilink
        English
        arrow-up
        3
        ·
        10 months ago

        Loading was my usual, and our hub sucked. Fuck tons of goddamn fruit in wax, and then would come the big packages about right as I was loading on my own, so now I had that thing strapped to me, trying to work around the belt with a damned TV to scan.

        Smalls was my dream. Lightweight, wrapping took no time, steady pace but never overwhelming. Night just flew by, chatting about bullshit. Jumped at the chance any time they needed a body.

  • Pogogunner@kbin.social
    link
    fedilink
    arrow-up
    31
    ·
    edit-2
    10 months ago

    I remember using something like this - they can hook up to a barcode scanner you wear on your finger

    You had to strap them really tight on your arm, if you didn’t the weight of the device would make it rotate around and have the screen point away from you

    • credit crazy@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      ·
      10 months ago

      I have the same problem with my watch. I could tighten it but then it starts to hurt. Anyways I keep it just loose enough to be comfortable but tight enough I can correct it every half hour.

    • Signtist@lemm.ee
      link
      fedilink
      English
      arrow-up
      4
      ·
      10 months ago

      They weren’t these exact models when I was there in 2013-2014, but they’re definitely similar. The finger scanner thing was so cool; I was always playing with it when there weren’t any packages coming down the conveyor.

    • Sixner@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Hah! I was just thinking I used someone similar back in 2008-10 I think? Paired with a little hip printer.

    • thedirtyknapkin@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      10 months ago

      yeah, i always used to want to try and get at the thing a little, but it didn’t seem worth risking my job 😅. it was totally just running windows

  • GluWu@lemm.ee
    link
    fedilink
    English
    arrow-up
    24
    ·
    10 months ago

    There’s a lot of wearable/durable tech made for warehouse workers. I wish I had the money to buy all the awesome things I find. They’re still semi usable with new software. A lot run on the “mobile” windows architecture which takes Unix/Linux naively.

    • MeanEYE@lemmy.world
      link
      fedilink
      English
      arrow-up
      30
      arrow-down
      3
      ·
      10 months ago

      It’s industrial equipment, and industry is not really known for frequently upgrading. Floppy disks are still a thing.

      • BottleOfAlkahest@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        ·
        10 months ago

        These also look like they can take a couple of good knocks and keep functioning. You don’t really want sleek and glass covered like the new modern looking phones for a warehouse.

        • MeanEYE@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          10 months ago

          That too. LCDs meant for industrial use are indeed more robust and made to last. Not only screens of course. Glass or carbon reinforced plastics are used commonly due to really good properties where it can take a beating but remain flexible without cracking. Like you said, metal and glass don’t combine well.

      • AutistoMephisto@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        10 months ago

        Magnetic tape is still a thing, particularly for long-term data storage. If you want to keep some data around for longer than most humans live, store it on magnetic tape.

          • AutistoMephisto@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            10 months ago

            Yeah, but a lot of companies started storing their records on magnetic tape when that became a thing, and it’s more for continuity purposes. It’s still the lowest cost, highest capacity, longest durability solution for archival purposes.

  • Hux@lemmy.ml
    link
    fedilink
    English
    arrow-up
    17
    arrow-down
    1
    ·
    10 months ago

    2006 to 2013 felt longer with those, since you could slow down time on demand.

  • 0_o@lemm.ee
    link
    fedilink
    English
    arrow-up
    15
    ·
    10 months ago

    Reading all the comments reminiscing about using these as if they are now a relic of a bygone era. We errr… Still use them to this day, I don’t believe the company has any plans to upgrade in the near future either.

    We also still use dot-matrix printers. They’re still being manufactured to this day and the new ones even come with ethernet ports! (As opposed to serial, which again we still have some)

        • agent_flounder@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          10 months ago

          You’re not alone! Surely with modern tech one could make a thinner, lighter version. But retaining the keypad and large screen.

          (And yet I refuse to own a smartwatch hmmm)

          • CurbsTickle@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            10 months ago

            Yup, buttons are needed, I have an appropriately sized touchscreen in a bin, and it’s a great excuse to try out some new chips…

            Could even try with a lattepanda I think is at the office.

            Spare parts bin = fun times

            • agent_flounder@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              10 months ago

              Nice. I was thinking this would be great to test the limits of an esp32. Been messing with 'em recently using the official sdk with freertos. At 240 MHz it should be able to do all kinds of nifty stuff along with Bluetooth and/or Wifi.

    • AstralPath@lemmy.ca
      link
      fedilink
      English
      arrow-up
      11
      ·
      10 months ago

      It’s for work-related use, not for personal use. You’d never see someone wearing this outside of the workplace.

    • niktemadur@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      1
      ·
      edit-2
      10 months ago

      Strap this bad boy on, head on out to the singles’ bar.

      …do singles’ bars even exist anymore? Am I showing my age? Aw hell… they were old news even in my bachelor days.

      How about swingers’ clubs?
      Strap this bad boy on, sashay - or strut - on out to your friendly local neighborhood swingers’ club.

  • HRDS_654@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    10 months ago

    We used to use these where I work. They look cool, but they run Windows Mobile and don’t have a touch screen so they actually were very cumbersome to use. Luckily we only had to use them to scan barcodes and that app automatically loaded on boot, unless they fucked up. Rock solid, but also made me hate every moment I had to use them, especially when the scanner attachment wouldn’t register.

  • bionicjoey@lemmy.ca
    link
    fedilink
    English
    arrow-up
    8
    ·
    10 months ago

    Doesn’t look older than it is honestly. If you showed me this and asked me how old it is I’d have guessed early aughties