So were the Pinkertons. That doesn’t mean it’s morally justified.
So were the Pinkertons. That doesn’t mean it’s morally justified.
So you’re advocating for like… A debtors’ prison?
Unpopular opinion: Anyone that does repossessions of any kind is a class traitor. Let the rich collect their own debts.
Factoring in all the other fees that are tacked on, mine is $0.21/kWh in OK.
It started in the 70’s, By the 80’s Ruger was putting it on all of theirs. After Dix V Baretta in the 90’s it became fairly standard.
Same with those glasses. They fit Coco perfect at 100%, but he’s nearly 20lbs. 80% fit better on other cats I tried them out on (but can’t find any of the pictures).
I just slam a shot glass of baking soda and water when it gets bad.
Disclaimer: Not sound medical advice. Probably not good advice at all. But nothing works faster.
I got it from here.
I definitely need to print out some cat armor when I get time. He’s harness trained and knows if I’m strapping stuff to him, it means time to go outside and play; so he’s cool with that.
Aww. Turkish Vans are some of the best cats.
It’s a 2014 Nissan Altima. I’ve spent quite a bit of time trying to find wiring diagrams, but I haven’t gotten very far.
Would a dioide in like with my trigger relay stop the add-in relay from connecting the factory horn wire to ground?
Yeah. Put the stripe end towards the horn wire you are tapping into.
Edit: I just reread your post. If 86 is connected to your car’s horn wire, 85 needs to be connected to 12v, not ground. That’s probably the issue you’re running into (but I would still run a diode for isolation).
Can you not just stick a diode in line with your trigger wire so you don’t get feedback from the relay?
Charges expected to be dismissed as part of the plea deal include possession of child pornography.
That’s a twist in this story I hadn’t seen yet.
I can remember the Yahoo chat rooms of the 90’s. It’s always been doods cybering lesbian sex with each other.
Sometime when it’s being annoying,try the finger drumming technique and see if it goes away. The first time I did it, the silence was unnerving. If it gets quiet, it probably is tinnitus (but still get it checked out).
I’ve got an Ender 3 pro motherboard (not silent steppers) that you can have for shipping costs if you determine that’s the issue. If you do, pn me your zip code and I’ll let you know how much it would be.
~~I would test the ribbon cable to the extruder before replacing the mobo. That’s a more common failure. Plug one of the other stepper cables into the extruder port and see if it moves. If it does, the mobo is good and the cable Is bad. ~~
Edit: I see you’ve done that.
You might still try reflashing the board just to make sure it isn’t a software issue. But if you need one let me know.
Twice a day. Little buggers eat better than I do. But I also mix it 50/50 with water and make a kind of cat food slurry to force them into hydrating a little. And then I put a little dry food out late at night as an offering so they will let me sleep.
It sounds expensive but it works out to a little under $2 per cat per day in food.
I bought the model here and printed them out at work.
Most of us have.