DAK catalogs were wild. Each item had a magazine article length description that was clearly bullshit. But by the end you’re certain that the constant emptiness you feel is from not owning the World’s Best 16 Channel Stereo Graphic Equalizer.
DAK catalogs were wild. Each item had a magazine article length description that was clearly bullshit. But by the end you’re certain that the constant emptiness you feel is from not owning the World’s Best 16 Channel Stereo Graphic Equalizer.
An alkaline AA may have more capacity, but the LiPo has lower internal resistance and it’s electrolyte is flammable. The worst the alkaline would do it shorted or punctured is get warm and poop out KOH.
$ :|wc -c 0 $ touch /tmp/f; :>>/tmp/f; wc -c /tmp/f 0 /tmp/f
You don’t need the original source to program a flashlight. If it’s ATTiny based then Anduril has your back.
“fill angle” under infill settings.
Nope.
UPDI used on Atmel micros on Anduril capable flashlights uses a single line for debug and flashing. Much earlier than that, Motorola/Freescale/NXP Coldfire, S12, and some other MCUs used BDM which was also a single wire protocol.
If you want to flash a newer Anduril to this light, look here for hardware and procedures to use those pads.
Yep. I can get ASA down to 12% with an ambient 50%RH using that method.
There are some models out there for wedges with reverse Bowden fittings so you can keep it cracked open all the time.
USB 5V power can be equally noisy, even from a powered hub, so that argument doesn’t make any sense. PCIe has a high current 12V rail available that has much more margin than USB for filtering with an LDO and run your signal chain well above the noise floor of the components.
Besides, Asus Xonar as in the picture can take 12V from a drive connector to bypass the motherboard PCIe 12V “just in case”.
Try running your dryer with the lid propped open a bit. Most Sunlu dryers don’t have a way to get rid of the humid air pulled out of the filament.
I mean, if I had the disposable income I’d get a Flipper Zero to mess around with, but it’s not on my list of things I need for my hardware hacking go-bag.
What’s the need you’re trying to fill?
If you want to get into RF, and not just for hacking a few specific protocols, an RTL-SDR is a better choice and much, much cheaper than a Flipper Zero. For $40 on Amazon you can get an RTL-SDR.com kit complete with antennas that will let you capture data from smart meters, aircraft beacons, police radio, and even detect individual cars driving nearby by capturing serial numbers from their TPMS sensors.
deleted by creator
Next week: Fedora meets a new friend named Lennart while on her way to Multiuser Mountain. Will they be able to cross the init bridge without being caught by Sammy the Systemd Hating Troll?
Also Professor Charles Javier
J E N O V O
You’re gonna carry that weight
My manager was understanding after I explained that it was unintentional. But it made support and sales look bad in front of the customer, and in a cascade of finger pointing the director of our department decided that would convince everyone that justice had been done.
I hold a grudge against the translucent plastic fad.
Once upon a time the Linux workstation at my desk at $CHIP_COMPANY was built into a noname transparent teal ATX case. For that reason I gave it the hostname “fugly”.
We had excessive field failures with some of our chips, and I was tasked with coming up with a way to identify those bad parts at customer sites. My solution was a bootable Linux CD that would run a test and tell the customer if they need to contact us for a recall. The test relied on a modified Linux kernel, so it couldn’t be distributed as an application. I used “fugly” to develop and build the test, patched kernel, and CD image.
The test was deployed, the first few customers were pleased, and I got a wood plaque and bonus for my efforts.
A few weeks later, my manager called me into her office looking uncharacteristically pissed off. She asked why I put a message saying “fugly” into the CD. A customer complained about it, saying they saw “fugly” on the screen when the test was running, and while it did it’s job it was unprofessional. A split second of confusion before I realized what happened: at boot time the Linux kernel prints the name of the machine it was compiled on, in this case fugly.team.company.com
. It scrolls past quickly on boot, so neither I nor my collaborators ever noticed. Somehow the customer latched onto it.
I ended up with a slap on the wrist, being put on PIP for 6 months and having to change the hostname because higher-ups needed their pound of flesh.
Coincidentally, a week after this incident, Toyota posted a billboard at a major intersection near our office advertising the Scion xB that read “Funky? Or Fugly?”.
Former Oculus Go users:
First time?