Toni Collette deserved an Oscar for this movie

Homeworld and Hotline Miami are my two favorites!

Thank yoy so much! I actually lay out the method step-by-step in one of the comments. 🙂

If you’re willing to pay for premium, Proton supports custom domains and catch-all addresses, so you can cut out all the extra mail relay stuff. Just give out vendor@mydomain.com, and it all comes back to the same mailbox. If it gets compromised, just set up a rule to trash anything to that address.

PORK CHOP SANDWICHES

Awesome! I resin printed some batarangs myself! I did four different styles from different movies, then picked up a shadowbox frame and some red velvet and mounted them vertically with some wire. I ended up giving that to my younger brother as well, lol.

So now this satellite can be an “anomaly” for another satellite, and the circle of life continues…

Gave it to him today and he was stoked! Also figured id post a detail shot of the base:

Of course! But it’s all filament, specifically PETG. 🙂

Not sure id say “prefer” as i don’t have experience with many others, but i used rustoleum sand and fill primer from amazon

Just realized i should probably share the STL link in case anyone wants to make their own: https://www.thingiverse.com/thing:4245103

Its translucent green filament with green EL wire run through it, with the battery pack stored in the base.

Fosho

Printed plastic, but I’m glad my paint job made you question! I do wish the gears turned, but the model designer was trying to emulate what he saw in the game, which didn’t seem to care about real functional parts, haha

Hell ya it do!

Thank you! I have high hopes 😉

Thanks! I do wish the EL wire was a bit brighter, but when the lights are all off it looks great!

Thanks!!!

Here’s a quick rundown:

• printed all parts in PETG
• Sprayed all parts with multiple liberal coats of sand and fill primer
• sanded things down with disposable nail files (wasnt too finicky, mostly wanted to smooth the box part and get rid of some bad layer lines on the posts)
• wiped everything down to get rid of the dust (i sanded only a few hours after spraying, so there was hardly any dust anyway, but just to be sure
• based coated all parts in metallic gunmetal (sans “neon”)
• heavy metallic silver dry brush over most everything
• assembled it
• dry brush stippled dark rust around most the rivets/edges, and anywhere grime would settle (way easier to tell where that would be when its full assembled)
• Dry brush stippled bright orange rust color over top of the brown areas where corrosion would be worst
• came back through with light silver dry brush in non corroded area (i got a little overzealous with the dark rust color)
• used a homemade oil wash (black and burnt ochre oil paints mixed with some mineral spirits) over top of all the gears, and ran a heavily loaded brush along the top edges and over rivet, letting the wash drip dpwn the sides.
• after it dried for 5-10 minutes, i used an old frayed brush to lightly drag the wash down to make the big drips look for natural
• After i was done, I realized i overdid it a bit again, and went back through with some mineral spirits and cotton swabs to re-expose some of the “bare metal” in the centers of the panels. I love oil washes! You have a ridiculous amount of time to manipulate the paint before it dries up, and looks terrific after it’s dry.

And there you have it!

1000%

Haha, thanks! He’s a fellow gamer, so i get to work on cool 3D printing projects without clogging up my living space with knick knacks. 😆

I printed/painted this for him a couple years ago (sorry for potato quality photo):