JustEnoughDucks
- 10 Posts
- 657 Comments
26739·2 days agoWell the entire multiplatform astroturfing campaign from people who call themselves leftists worked! Democrats stayed home instead of voting.
Now Palestine will be completely flattened with 0 resistance at all, and redoubled support and bombs for Israel! Way to go! You really showed your support for Palestine by helping this happen!
They will probably come back saying “it wasn’t our fault, we just pointed out the truth” while they shouted that a vote for Harris was a vote for genocide [so don’t vote for harris] from every platform that they used.
2·2 days agoAh yes, the classic child-abuser-apologist line that every “christian” brings out when confronted about the abuse of their revered leaders that they absolutely refuse to condemn before they go back to church to give money directly to the abusers every week.
Do you love Jesus or have convinced yourself that you love him because you are so afraid of hell? Very Stockholm syndrome-esque. Take kids during their developmental years and tell them that “people” go to hell and are tortured forever unless they love Jesus and follow sky-daddy’s rules (and by extension, the rules of the church). Then they are told that over and over until they are brought to a special ceremony to declare their love.
Or I guess you have never once been to church and never a single time been told that people go to hell if they don’t love Jesus and accept him into their hearts? I guess you just read the entire bible without any external influence at all and converted after your brain was fully developed after 25 or so, again, with nobody telling you about it. But I guess when you lie, you can just ask Daddy for forgiveness and you get off with no consequences! Tons of harm, no foul.
Either way, I guess I am glad because it is the only thing stopping you from rampaging around murdering, raping people and animals, stealing, torturing, maiming, abusing, and whatever else you apparently so strongly desire to do.
2·2 days agoYou said it right there in your comment.
Sleep mode, (and other effectively off modes) where it is functionally useless, it can do.
MSP430 can do 140uA/MHz. That is ~7 times the power that this application supplies, and that is not counting any single other chip quiescent current or chip that actively provides useful data. You would have to have a battery anyway or a big cap to provide the needed current for on-states. Or you could run it extremely low frequencies like you said, but those tend to not scale linearly at all with per MHz power ratings. Quiescent currents tend to catch up fast at that scale. I would be extremely doubtful that 150kHz would scale perfectly and wouldn’t have already exponentially decayed to around its lowest possible on-state consumption for the chip. I would definitely have to see tests on that.
The smallest of batteries like the VARTA tiny cells in TWS’s are infinitely more useful and practical and it would take this application months to fill a single cell, discounting all losses.
Abrahamic religious organizations are notoriously and with very few exceptions, hosts to child abuse rings and shuffle pedophiles consistently around their organizations when it comes out in their community. See: every Catholic church scandal of the last 100 years and further, and hundreds of protestant church scandals in the past decades.
They threaten that if you don’t follow their book and do what they say that their deity demands, you will be tortured in hell for all eternity.
There is no hate like christian love.
https://www.bishop-accountability.org/AtAGlance/USCCB_Yearly_Data_on_Accused_Priests.htm
https://www.catholicnewsagency.com/news/254393/illinois-attorney-general-report-sexual-abuse
And hundreds more of individual cases here: https://www.reddit.com/r/PastorArrested/
Not even counting the sexual predator pastors and clergy shielded by the church
61·3 days agoIt is the Mac of network hardware in my corporate - entered experience.
It is aesthetic hardware, marketing, and everything software related looks polished on the surface, but is buggy (particularly their access which is the worst thing to be buggy) with the least possible configurability, completely obscured debugging resources, and proprietary ways to make you reliant on their support services.
That being said, I am still using them because I got a 30€ UAP-AC-SHD from my company’s old stock when we switched to Cisco hardware. And their cloud gateway ultra is a good value. My whole house setup with prosumer hardware will be 140€ and where my internet comes in is the worst place in the house to put a wireless router.
I don’t think people realize how extremely little 50uW is.
For a standard 3.3V microcontroller assuming a 95% efficient voltage regulator will be a current of 14.4uA. Just having the HSI master clock enabled on one of the low power STML0 chips is 15uA. This will literally only the clock. That is 0 sensors, 0 communication, 0 IO, nothing useful at all. For reference, reading SPO2 with a very efficient maxm86161 takes 10uA by itself in ultra low power mode with low accuracy and not counting the max leakage current of 1uA. For full operation, you need about 1000x-10000x that amount for short bursts.
“Oh but it can cHaRgE tHe BaTtErY”
Let’s say the device has a standard 100mAh battery (apple watch had a 228mAh or more). At 100% efficiency with absolutely not one millijoule being used by any other electronics (which would never ever happen, it would at the very least need a boost converter), it would take around 277 days to charge up that tiny tiny battery.
Let’s take another example of an even smaller battery. To charge one side of the airpods 3rd gen (0.133Wh battery), it would take 110 days per ear
This is one of those free “energy harvesting” fad BS based in nothing but wishing and marketing. It is an interesting learning project for wireless antenna beginners, but that is the extent.
Wow, just tell everyone that you are a sociopath with no conscience or empathy?
If you have no morality without pedophiles and a global child abuse rings threatening you with torture for eternity, then you are a horrible person all around with or without religion.
35·4 days agoWhile true, in order to get Linux mobile more mainstream, you have to have great google compatibility just because of the sheer volume of people that have to use google calendar for sync with family and friends and/or have gmail as a primary email. That’s just a shitty fact of life. Baby steps.
However, indeed you are completely right that at the current time there are probably a very low amount of people wanting to use it right now that are completely reliant on google.
In Europe:
gazelle is solid, but just okay for the price. They generally have very bad shock absorbtion in my testing. Many of them have a fork with no shocks making for an extremely jarring ride because ebikes are heavy.
Norta for great bang for your buck
Flyer for a bit more expensive but very good quality
Riese & muller for when you just have way too much money to spend.
Stromer for speed pedelecs (45kmph vs the normal 26kmph)
Then there are a ton of bikes with the standard Bosche Active Plus (performance is better), 500Wh battery (625Wh power tube is best). They are probably all fine, but use the same parts in general with just a different frame.
Belt driven instead of a chain if you want extremely low maintenance. The cost of a belt replacement is approximately 3x a new chain and the chain has to be replaced 3x as often, so it comes out about the same.
Is the new shotgun any good?
~/workspace/git
That way I can also keep other stuff in the same “workspace” directory and keep everything else clean
I have a Code, simulations, ECAD, and FreeCAD folder in the workspace folder where projects or 1-offs are stored and when I want to bring them to git, I copy them over, play around in the project folders again, then copy changes over when I am ready to commit.
I could better use branching and checking out in git, but large mechanical assemblies work badly on git.
KDE for my main PC. Pretty with floating panels, KDE Connect, QT apps are often the best apps in their class and are perfectly integrated (FreeCAD, krita, okular, kdenlive, vlc, dolphin, etc…) And konsole is also very full featured.
I don’t know what KiCAD uses, but it also seems very well integrated into the KDE desktop unlike most gnome apps.
XFCE on MX Linux for an old Intel Compute Stick to keep it very usable.
With electronics, that is only the tip of the iceburg before you get into trinocular microscopes which the absolute cheapest are almost 300€ nowadays 😉 then assembled PCB prototypes where every iteration can be 200-500€ depending on size. Or you could get into spending hundreds on hotplates and reflow ovens to do it yourself.
But wouldn’t it be faster and cheaper in the long run to be able to fabricate the simple PCBs yourself? There goes 1000€ on a small CNC 😂 rabbit hole goes deeeeep.
Electronics projects mostly.
Mostly smart home PCBs and interconnect boards and 3D modelled housings. Examples:
- esp32-C3 dumb doorbell (just a doorbell that sends an MQTT message and sleeps the rest of the time). It works fatastic except that my Proximus ISP modem/router completely fucked up and so the network is no longer usable and I had to set it in bridge mode to a router it can’t reach. I want to release it, but haven’t had the time to water - resistance test it or make assembly instructions
- esp32-S3 voice assistant satellite attached to an IR blaster, I2S mic, and PCM5102 to control and send audio to my old Yamaha RX-496RDS to control it via IR and can play audio (local or Spotify) via music assistant. Pretty much an Alexa echo attached to my speaker system. PCB link which I am planning on releasing.
- My unfinished Flight Stick with custom electronics, fully custom 3D printable housing, etc… It is almost done, but needs like 2 more small iterations, but we moved and started doing a full-strip renovation, so my 3D printer is no longer set up because it is too dusty inside, and I don’t want to spend another $100 doing a PCB test iteration to use a better ADC with less components. Eventually as firmware practice, I want to rewrite the firmware in Rust or something. I also just looked at the Repo and the quick logo I drew up has been modified somehow without any commit. I know for a fact it was correct before. Very weird.
I also have tons of new project ideas that I don’t have time for.
My other hobbies
-
weightlifting, again completely dropped off due to every free moment renovating
-
Running a home server with replacement services for everything I need
-
Running (my motivation has been 0 recently…)
-
cooking. I try to do a few new recipes per month
-
gardening. With the renovation, I just grew a few courgettes, tomatoes, and squash this year
-
video games (more of a de-stresser nowadays than a hobby, most recently casual rocket league with friends is fun, hadn’t played since 2018 or so)
3·11 days agoEase of electronics.
It is more expensive and bulkier using those cells because you need boost converters instead of dirt cheap linear regulators to put a modern 3.3V MCU in there. With how cheap lithium cells are (and that they are rechargeable) nowadays, the power converters + the mechanical AAA housing is often more expensive than a lithium cell + charger
Hopefully we will switch over to sodium ion in the coming 5 years or so which are rechargeable, cheaper materials, higher charge cycle counts, and completely safe at the cost of also needing a boost converter. Maybe we will even start to shift more towards 1.8V MCUs. Sodium ion is better in nearly every way than alkaline while just having bad capacity compared to Li-ion.
“Critical” as in not really needed.
It is very bugged and constantly runs even if it isn’t doing anything. It will also max out your disk IO for hours at a time with an HDD for larger game storage.
I have had it off for 1.5 years across 3 OS installs and have never had a problem with stuttering or shader related problems in that time. It is really not needed anymore for 95% of games since the Linux async solutions were merged.
Maybe if one uses severely out of date kernels it is critical
This seems like classic corporate backtracking when their customers spot a terrible, deliberate decision.
That being said, I am happy about it. I got my company to use it and finally got my girlfriend to use it and just recommended it to her brother. Would hate to have to try to find something else
On a desktop where this screenshot was taken, it is likely not an OLED.
Using light mode means you can turn down the brightness significantly during the daytime and you don’t get blinded by apps and webpages that don’t respect dark mode. Setting an off-white DE theme makes it softer on your eyes, especially with the lower brightness. So it is similar for your eyes but less power wasted in an LCD panel blocking the light.
Also less IPS glow artifacts and less visible ghosting usually.
For phones, black dark mode for power savings.
Also, I am confused at why nextcloud is at the intersection of networking, music, and multimedia.
Yes it technically has a video viewer and music player, but I would be very surprised if any person in the world right now is genuinely using it to post that content to the fediverse social-network style.