Exacto knife and carefully slice them down?
Mildly Infuriating
Home to all things "Mildly Infuriating" Not infuriating, not enraging. Mildly Infuriating. All posts should reflect that.
I want my day mildly ruined, not completely ruined. Please remember to refrain from reposting old content. If you post a post from reddit it is good practice to include a link and credit the OP. I'm not about stealing content!
It's just good to get something in this website for casual viewing whilst refreshing original content is added overtime.
Rules:
1. Be Respectful
Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.
Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.
...
2. No Illegal Content
Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.
That means: -No promoting violence/threats against any individuals
-No CSA content or Revenge Porn
-No sharing private/personal information (Doxxing)
...
3. No Spam
Posting the same post, no matter the intent is against the rules.
-If you have posted content, please refrain from re-posting said content within this community.
-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.
-No posting Scams/Advertisements/Phishing Links/IP Grabbers
-No Bots, Bots will be banned from the community.
...
4. No Porn/Explicit
Content
-Do not post explicit content. Lemmy.World is not the instance for NSFW content.
-Do not post Gore or Shock Content.
...
5. No Enciting Harassment,
Brigading, Doxxing or Witch Hunts
-Do not Brigade other Communities
-No calls to action against other communities/users within Lemmy or outside of Lemmy.
-No Witch Hunts against users/communities.
-No content that harasses members within or outside of the community.
...
6. NSFW should be behind NSFW tags.
-Content that is NSFW should be behind NSFW tags.
-Content that might be distressing should be kept behind NSFW tags.
...
7. Content should match the theme of this community.
-Content should be Mildly infuriating.
-At this time we permit content that is infuriating until an infuriating community is made available.
...
8. Reposting of Reddit content is permitted, try to credit the OC.
-Please consider crediting the OC when reposting content. A name of the user or a link to the original post is sufficient.
...
...
Also check out:
Partnered Communities:
Reach out to LillianVS for inclusion on the sidebar.
All communities included on the sidebar are to be made in compliance with the instance rules.
The correct answer.
And then cut the garlic to make red sauce.
Could also use a double-ended safety razor and shave it down, if you really want to try to pull just enough off.
Well, return it. While being refurbished, it doesn't necessarily need to be in perfect shape, it still needs to work as it would when you buy it originally.
Return it and get your money back or have them send you the correct feet. This is unacceptable
I have an L390 Yoga (i7) and these feet are indeed way too large.
The device is painful to use even with the correct feet, though - at least if you're using Windows. It's constantly overheating, because the cooling system is just reused from the L380 and can't handle the heat of my i7 8565U processor. But hey - at least the marketing people were able to put "4.6GHz" into the specs.
I have to undervolt the CPU to make it run cool and prevent thermal throttling, which is not possible anymore if you're running a current Windows version.
That thing is probably the last Thinkpad I've ever bought, to be honest.
Also, if you’re wondering what that port with network symbol is, it appears to be a proprietary connector used on ThinkPads requiring an “Ethernet Extension” adapter to be usable.
Yup, the port is called "MicroLAN" and the adapter was 30-50€ back when the device was new. It's of poor quality (the rubber of the cable on mine is turning into a sticky mess) and entirely passive.
Lenovo must've looked at Apple's accessory profits and thought they wanted to make money off of crap, too.
It's of poor quality (the rubber of the cable on mine is turning into a sticky mess) and entirely passive.
Maybe ten years back, a whole ton of consumer electronics were made with some rubberized coating which felt great when new, but over the course of several years, degraded into an incredibly sticky mess.
I had a Grundig shortwave radio covered in the stuff. A couple of other gadgets.
Eventually, after I went to a lot of work with different substances, I discovered that isopropyl alcohol and some elbow grease could get it off. Didn't look or feel great anymore -- just plasticky, no rubberization -- but it was a lot better than being sticky. But if this is the same stuff and it's just a cable, I'd probably just replace the cable.
EDIT: Probably the same stuff as here:
https://old.reddit.com/r/hardware/comments/6fznfp/cant_companies_stop_using_coatings_that_make/
The main reason why this happens is the "soft touch", rubbery coating that gets put on plastics is a substance called "TPE".
TPEs are popular for this sort of thing because they're quite cheap to apply, look and feel good and quite importantly compared to genuine rubber coatings, don't smell bad.
The problem with TPEs is that they experience a chemical reaction when exposed to oils which causes them to degrade into a goopy-sticky mess.
The way to avoid this happening prematurely is to ensure that your hands are clean when using your mouse/headset etc., both bodily oils and environmental (food etc.) oils can and do affect the TPE.
It still happens after some time: I bought a rangefinder in a sealed plastic box at a fleemarket and it was somewhat sticky. It was the kind of welded box that needs scissors to open it and it was manufactured only a decade ago.
As somewhat of a retro '90's-2000's electronics collecting nerd, this stuff is the bane of my existence.
It seems like in the early 2000's there were only three types of finishes applied to electronics products:
- TPE "soft touch" coatings that turn into snot after a few years (many game console controllers, binoculars and other optics, some portable tape/CD players, etc.)
- Crappy metallized silver paint that starts flaking off immediately (basically every digital camera ever made from 1999-2006, and quite a few computer input devices)
- White or Bondi Blue plastic under a clear acrylic layer trying to ape an early iMac or iPod, which gets dirt trapped between the layers and then turns yellow (the Nintendo 3DS Lite, innumerable computer mice, USB hubs, and knockoff MP3 players)
You just can't win.
Crappy metallized silver paint that starts flaking off immediately (basically every digital camera ever made from 1999-2006
Oh, man, yeah, I'd forgotten about that. Had (have?) a camera with that.
White or Bondi Blue plastic under a clear acrylic layer trying to ape an early iMac or iPod
Hah, I avoided those. I think I had one translucent device at one point.
That being said, from the 1970s and 1980s, you had all those light beige things that yellowed. It wasn't the worst kind of aging, and it was treatable, but there were so many items whose age was visible...most of those later trends weren't as universal across items.
https://www.henningludvigsen.com/index.php/2020/06/03/sun-fading-old-yellowed-plastic/
Hmmm, did you get it new?
I've checked a review of this laptop and it had correct ones:
Yes I bought it ~3 years ago directly from Lenovo and the rubber feet look just like the ones in that photo.
It looks like the feet are on the opposite side of the hinge in this photo and on the same side as them in your photo?
There are feet both on the side next to the hinge and on the side opposite the hinge in the photo. Like, one one each corner of the underside of the laptop.
You can buy them online for a few bucks
My guess: the person who returned it put those on.
you should be able to cut them down to the right size