Thought of you fine folks when I came across this article on aussie.zone

  • nyahlathotep@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    20
    ·
    9 months ago

    I was going to say this sounds like thermal runaway waiting to happen, but apparently it’s been running for 10 years so clearly he knows what he’s doing

  • Admiral Patrick@dubvee.org
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    2
    ·
    9 months ago

    I feel like the PV panels on the side are just gratuitous. Can’t imagine they’d contribute much, right?

    • badlilbean@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      11
      ·
      edit-2
      9 months ago

      “When it’s not plugged into the home the van’s batteries are being charged by a 1-kilowatt panel on its roof and small panels on the sides which charge the indicators and lights.”

    • hazeebabee@slrpnk.net
      link
      fedilink
      arrow-up
      11
      ·
      9 months ago

      I could see them adding a significant charge in morning/late afternoon when the sun is low. Im dont actually know though lol

    • perestroika@slrpnk.net
      link
      fedilink
      arrow-up
      9
      ·
      edit-2
      9 months ago

      You’re correct. Only the roof is likely to give significant power. Been there and done that, on the opposite side of the planet though. :)

      The “something” on the picture I attach… was built in some squat in Eastern Europe. It had a flat roof of approximately 2 x 1.5 m, all of it solar panel. Solar panels weren’t great back then. Typically it charged its 4 KWh battery in a few days of sunshine. Only during midsummer (18-hour days) was there any chance of a full charge in a single day.

      Unlike the van, the “something” required a smaller inventory of tools to build. Instead of lawnmower motors, a Chinese electric motorcycle motor was used. Sadly it’s now retired due to metal fatigue. :( Lesson: never build a structure that flexes out of aluminum - aluminum has no fatigue limit, any flexing will lead to cracking.

  • poVoq@slrpnk.netM
    link
    fedilink
    arrow-up
    7
    ·
    9 months ago

    Sadly laptops don’t use these standard battery types anymore, but I guess powertool batteries still work as a source for recycling them.

  • rem26_art@kbin.social
    link
    fedilink
    arrow-up
    6
    ·
    9 months ago

    thats a pretty sweet van lmao. I like the shot of his house tho thats also covered in solar panels. This guy knows what he’s about.

    • perestroika@slrpnk.net
      link
      fedilink
      arrow-up
      4
      ·
      edit-2
      9 months ago

      If the approximate weight of an 18650 cell is 50 grams, 8000 of them would indeed be 400 kg. Probably more, since they must be packaged somehow. But the pack can be split into modules which a one person can haul around somehow.

  • Flumpkin@slrpnk.net
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    9 months ago

    three 10-horsepower electric motors from ride-on lawn mowers.

    Oh I thought he had ICE lawmower motors for some kind of hybrid engine.

    If you only have a small regular commute like 5-20 km for work or shopping you really only need a tiny electric car and battery.

    I would have loved to have / build something like this but in my well regulated european country it’s near impossible to get this street legal certification. A mobile home / caravan with 12m² of roof space and 6 kWh of solar panels.

    Instead I want to build a solar powered boat. You don’t need to move so fast and can have roof surface area and you can travel the world without moving. It’s not exactly easier than converting a car though lol.

    • perestroika@slrpnk.net
      link
      fedilink
      arrow-up
      4
      ·
      edit-2
      9 months ago

      I would have loved to have / build something like this but in my well regulated european country it’s near impossible to get this street legal certification.

      Yep. :( The certification manual here, in a moderately regulated European country, is about 250 pages long. Fortunately, not all chapters apply to moped-cars. If one really really wants, moped-cars are the way to break through the barrier.

      • Flumpkin@slrpnk.net
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        9 months ago

        Something like “L7e”? There are some European classiciations that are theoretically pretty interesting. But you still have to get certified parts, like motor without electric noise and batteries and controller and (I think) still have to test them together in a certified expensive lab. Also windshields.

        I wish we had a constitution that costs arising from bureaucratic regulations always have to be paid by the state and never by the citizen. That would fix regulations real quick :D

        • perestroika@slrpnk.net
          link
          fedilink
          arrow-up
          3
          ·
          edit-2
          9 months ago

          Yep. I’ve done an L2e, and some day I will manage an L7e. :)

          Interference testing was not needed. The motor wattage and motor controller wattage labels were examined. I could have dropped in more power in a mood for forgery, but I was in an honest mood. :)

          • Flumpkin@slrpnk.net
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            9 months ago

            Oh wow very nice, congrats!

            I want to build a tadpole recumbent / cargo bike for shopping, then maybe a quadricycle and a velomobile with motor for pedelec. I wish they’d allow pedelec up to 50km/h instead of 25 without needed certification and insurance. That’d be a huge boost for the environment. But even the L1e with 45km/h seems purposefully gimped for city traffic to protect car manufacturers.

            But a proper “recumbent motorcycle” that can go 100km/h with 3 or 4 wheels and is ultra lightweight would be awesome too.

            • perestroika@slrpnk.net
              link
              fedilink
              arrow-up
              3
              ·
              9 months ago

              Myself, I went for 45 km/h officially (unoffially, on a flat road, I could reach 53 km/h). While turning, for safety reasons, I limited myself to far lower speeds (25 km/h).

              Designing a car suspension system for reasonably high speed seems hard, I have never tried, instead choosing the robust and crude solutions to get a reasonable assurance of strength.

              Motorcycles seem easier. Especially since most of factory-made motorcycles use a sprocket and chain - a very flexible system for dropping in other power sources. I imagine that with enough know-how to get through type certification, a lot of combustion bikes could become e-bikes with excellent riding characteristics. :)

    • BruceTwarzen@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      9 months ago

      I just watched a video where a guy buld a little solar panel boat and i was kindo shocked how well it worked

      • Flumpkin@slrpnk.net
        link
        fedilink
        arrow-up
        3
        ·
        9 months ago

        Well to go slow you only need very little power. But it goes up exponentially much more like with wheels. So you need to design a boat that is long, thin, light and with a large roof surface area. Basically a catamaran or a power trimaran. Then you want glass solar so it’s affordable and lasts 20+ years but that is top heavy. But theoretically with the right design solar panels are cheaper than a sail and less complex and easier to maintain than sail+motor+house battery.

        But 4-5 knots (~mph) is quite easy. From my amateur calculations 6-7 knots is already hard. I mean those speeds that are sustainable for 24/7 cruising. If you have a large car battery you can go vrooom for a few hours and then slowly recharge over a few days. But my goal is really a slow but seaworthy condomaran.

    • Deceptichum@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      9 months ago

      I’m confused as fuck as to how he got through the regulations to build it here in Australia as well, let alone drive it on the roads.

      • Flumpkin@slrpnk.net
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        9 months ago

        I suspect that some people manage it because they know people / worked with them and they give them a bit of leeway. So you can get lucky. We have a saying “Where there is no plaintiff, there is no judge”.

    • perestroika@slrpnk.net
      link
      fedilink
      arrow-up
      3
      ·
      9 months ago

      It seems like he used the engines of electric “raiders” (ride-on lawnmowers, that is - small tractors). I cannot fathom why and how he used 3, but the tools in his shed suggest he can build anything. That’s one impressive shed.

      • Nougat@kbin.social
        link
        fedilink
        arrow-up
        3
        ·
        9 months ago

        It sounds to me like he swapped out the original engine for those three lawnmower engines on a lark, perhaps to charge batteries that run an electric motor (kind of like diesel-electric locomotives do, although I don’t believe those have batteries). Then the solar panels were added, negating the need for the lawnmower engines, which haven’t been removed from the system.

        • perestroika@slrpnk.net
          link
          fedilink
          arrow-up
          4
          ·
          edit-2
          9 months ago

          What I see on his photos are at least 2 (third one likely in reverse, where his finger is pointing) reasonably powerful electric motors on a single toothed belt pair of toothed belts.

          image

          I think there’s no combustion engine left in that car. I suspect he combined them because the van wouldn’t ride well with only 10 KW.