I finally got multi-color working on my Creality K1 Max using the 3D Chameleon.

Decided to make a 2 color benchy and scaled it down to 75% to save time, along with 0.25mm layer height.

So far the Chameleon has been pretty picky with filament, but when it works it works well! This print is with silk gold and matte black. I have even gotten 95A TPU to print with it surprisingly!

I modified the color-change code so it takes 1 minute less, which makes a big difference when you have hundreds of color changes.

Next up, 4 color benchy. Probably will be 10 hrs lol

  • 4lan@lemmy.worldOPEnglish
    4·
    9 months ago

    very. I spent the last 3 weeks fiddling with the timing. If you are not willing to troubleshoot and work on it I’d go for a ready-built solution like the AMS. I like the challenge, but definitely underestimated it

    Most of it was me not fully understanding what was happening in the filament swap gcode. Once I understood that I was able to tweak settings to make it work. Once I found out certain filaments are just trouble I have had better luck. Still working on getting it to be less picky.

    the updated version in April is going to have sensor-less detection of where the filament is in it’s path, which will make timing a non-issue. Any Chameleon sold until then will have the hardware needed, and can be updated for free in April. can’t waiit