I just received my M44, and I’m experiencing weird behavior with the aux lights. Whenever I turn off the light, the aux quickly flashes red then goes to cyan for about 4 seconds before returning to my selected color. Is anyone else experiencing something similar?

Edit: That was with sofirn 3000 mAh batteries. With P28As, it only does the quick red flash.

  • containerfan@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    It’s not covered very well in the text manual, but it sounds like it might be the post-off voltage display. The sequence from full to low is purple --> blue --> cyan --> green --> yellow --> red. If that’s not it, then you might try factory resetting (13H).

    • Irons@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I did some more testing, and it seems you’re right. Although, after factory resetting it still does the same thing. Looks like it’s the default, and I don’t see where to go to it in the UI.

  • SammysHP@feddit.de
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    As already mentioned, this is the post-off voltage display. Depending on your firmware version, its time can be changed from the battcheck menu. Set to 0 to turn it off.

    The red flash is a bug that already got fixed (together with several other bugs). Do you have a flashing kit for updating the firmware?